X30 Oil Pumps
The Type X30 hydraulic axial piston pump is of a 30 kW rotating swash plate design and can deliver pressures up to 870 bar.
To suit your fluid compatibility, environment, maintenance and value requirements, these pumps are available with all stainless steel or all carbon steel external components.
The X30 pump is available with 3 or 6 pistons, providing flow rates up to 33.44 l/m (8.83 USg/m) as listed in the table below.
Rotation is bi-directional and the pump may be mounted horizontally or vertically.
A suction filter of 150 microns or better should be used. Finer filtration is desirable for the pump life, but is important that the inlet flowrate to the pump is not restricted and no more than -2 in.Hg is measured in the suction pipework under pumping conditions. Where possible a positive pressure should be maintained in the suction pipework under flowing conditions. When the pump is stationary the suction line should be kept under positive pressure to allow priming.
These pumps are designed to run on mineral oils with an operating viscocity between 15 and 100 cst. Consult the factory for viscocities outside this range.
The operating temperature range is –20°C; to +60°C (Ambient).
|Part Number||Cylinders||Flow||Flow @ 1450 RPM||Flow @ 1750 RPM||Pressure|