Type 14480 thermal relief valve



HOME


PUMPS, MOTOR PUMP UNITS

Water/Glycol pumps

Water pumps

Oil pumps


PRESSURE INTENSIFIERS

Topside use

Subsea applications


VALVES

Relief valves

Thermal relief

Directional valves

Slide valves

Shutdown, lockout relay,

excess flow, flowline pilot


GENERAL

About us

Quality

Contact




THERMAL RELIEF VALVES

Types 14460 & 14470

Type 14480

Compact design derived from the use of high performance coil springs.
Stainless steel steel elements operating in a linear bearing provide smooth repeatable performance.
Set point is not affected by changes in exhaust pressure which should not exceed 100 bar.

Designed to provide pressure control in systems subject to thermal expansion, the Type 14480 relief valve provides accurate repeatable performance with reseating within 10% of cracking pressure or better (static test conditions).

A unique feature of this valve is the lock down facility which eliminates the need to remove or disconnect the valve during proof testing of the system. Provision is made in the cap for a special lock down screw to be inserted to disable the valve and hold it closed against the increasing

 

pressures applied during testing of the system pipework and components. This eliminates the need to remove or disconnect the valve during test procedures. When the lock down screw is removed, the valve reverts to its as set condition without further adjustment or recalibration.

The thread in the cap is a non-preferred size, thereby preventing unauthorised insertion of other types of screw. Lock down screws are not provided with each valve to prevent unauthorised use; they are available on request.


Materials

External/wetted parts – 316 stainless steel
Hardened parts – M340 stainless steel
Other parts – CA104 bronze alloy


Drawing

 
  Pressure Connections Seat
Part No. range (bar) inlet exhaust material
14480–21 50 – 200 1/4"NPT M 1/4"NPT F Stainless steel
14480–22 200 – 600 1/4"NPT M 1/4"NPT F Stainless steel
14480–23 600 – 800 1/4"NPT M 1/4"NPT F Stainless steel
14480–25 50 – 200 1/4"NPT F 1/4"NPT F Stainless steel
14480–26 200 – 600 1/4"NPT F 1/4"NPT F Stainless steel
14480–27 600 – 800 1/4"NPT F 1/4"NPT F Stainless steel
14480–31 50 – 200 1/4"BSP F 1/4"BSP F Stainless steel
14480–32 200 – 600 1/4"BSP F 1/4"BSP F Stainless steel
14480–33 600 – 800 1/4"BSP F 1/4"BSP F Stainless steel
14480–45 50 – 200 3/8"MP Butech F 1/4"NPT F Stainless steel
14480–46 200 – 600 3/8"MP Butech F 1/4"NPT F Stainless steel
14480–47 600 – 1,300 3/8"MP Butech F 1/4"NPT F Stainless steel
14480–48 600 – 1,300 3/8"MP Butech F 1/4"BSP F Stainless steel


© Marshalsea Hydraulics Limited – a member of the Bifold Fluidpower group of companies.

Website by Big Bird Design