SLIDE VALVES



HOME


PUMPS, MOTOR PUMP UNITS

Water/Glycol pumps

Water pumps

Oil pumps


PRESSURE INTENSIFIERS

Topside use

Subsea applications


VALVES

Relief valves

Thermal relief

Directional valves

Slide valves

Shutdown, lockout relay,

excess flow, flowline pilot


GENERAL

About us

Quality

Contact



Typical installation incorporating a Marshalsea slide valve

 

Thirty different slide valves are offered, with 15 models being normally closed, each with a corresponding normally open version. All are pilot-operated, three port, two position valves with a spring return action. Full details are available by clicking the relevant Type number in the table below in which A indicates manifold mounted with integral pilot connection; B is manifold mounted with remote pilot connection; C incorprates special seals to enable the valve to be used as a selector.


Type number Working Pilot Nominal
 
Normally
closed
Normally
open
pressure
(bar)
pressure
(bar)
flow rate
(l/m)
A B C
3100 3105 690 103 – 690 27      
3100.M002 3105.M002 1,000    103 – 690 27      
3101 3106 690 103 – 690 27 x    
3102 3107 690 69 – 207 27 x    
3103 3108 690 103 – 690 27   x  
3104 3109 690 69 – 207 27   x  
3111 3115 690 4.5 – 17.2 27      
3111.M002 3115.M002 1,000    4.5 – 17.2 27      
3160 3165 690 3.4 – 17.2 27 x    
3163 3167 413 3.4 – 17.2 27 x   x
4100 4105 517 76 – 517 54      
4101 4106 517 76 – 517 54 x    
4102 4107 517 76 – 517 54   x  
4111 4115 690 4.5 – 17.2 54      
4160 4165 690 3.4 – 17.2 54 x    

© Marshalsea Hydraulics Limited – a member of the Bifold Fluidpower group of companies.

Website by Big Bird Design