Slide valve Types 3101-3104 (normally closed) and 3106-3109 (normally open)



HOME


PUMPS, MOTOR PUMP UNITS

Water/Glycol pumps

Water pumps

Oil pumps


PRESSURE INTENSIFIERS

Topside use

Subsea applications


VALVES

Relief valves

Thermal relief

Directional valves

Slide valves

Shutdown, lockout relay,

excess flow, flowline pilot


GENERAL

About us

Quality

Contact



SLIDE VALVES

Types 3100, 3105

Types 3100.M002, 3105.M002

Types 3101 – 3109

Types 3111, 3115

Types 3111.M002, 3115.M002

Types 3160 – 3167

Types 4100, 4105

Types 4101 – 4107

Types 4111, 4115

Types 4160, 4165

Pilot-operated, three port, two position slide valve with a spring-return action

Can be used locally as quick dump valves
Suitable for subsea applications
Special high pressure seals prevent leakage
NACE Standard MR-01-75 compliance


Slide valves Type 3101/2 (normally closed) and 3106/7 (normally open) are manifold mounted with integral pilot connection; the 3103/4 (normally closed) and 3108/9 (normally open) are manifold mounted with remote pilot connection. All types are pilot-operated, three port, two position valves with a spring-return action. The pilot operator of each valve is capable of withstanding high pressures equal to the main line pressure. This enables the valves to be used locally to actuators, as quick dump valves. The valves are sealed to withstand external body pressure making them suitable for subsea applications.

A major feature of the valve design is elimination of the continuous internal leakage which is characteristic of conventional lapped-face spool valves. The valves each incorporate special high pressure seals which prevent leakage and so render the valves suitable for use with many fluid media.

The valve slide (which can be supplied either normally closed or normally open) has a ‘block before bleed’ action. In a normally closed valve, for example, this means that the tank port is isolated before pressure and service ports are interconnected.

Materials

Predominantly 316 stainess steel and CA104 aluminium bronze with seals of fluoroelastomers and PTFE materials, ensure high corrosion resistance and comply with NACE Standard MR-01-75 (latest revision as applicable).

 

Operating parameters


Working pressure 690 bar (10,000 psi) max.
Pilot pressure – Types 3101/3/6/8 103 to 690 bar
(1,500 to 10,000 psi)
Pilot pressure – Types 3102/4/7/8 69 to 207 bar
(1,000 to 3,000 psi)
Operating media Mineral oils, water,
water-glycol based hydraulic fluid. Other media available on request.
Recommended filtration 25 micron
Connections 1/4"NPT F all ports
Flow rate, nominal 27 litres/min
(6 imp galls/min)
Working temperature – standard –20°C to + 130°C
Working temperature – arctic Available on request
Weight 3Kg

Port assignments


Port Valves 3101/2/3/4 Valves 3106/7/8/9
Port 1(A) 3101/2 – integral pilot 3106/7 – integral pilot
Port 1(B) 3103/4 – remote pilot 3108/9 – remote pilot
Port 3 Service Service
Port 4 Supply Tank
Port 5 Tank Supply

(c) Marshalsea Hydraulics Limited – a member of the Bifold Fluidpower group of companies.

Website by Big Bird Design